ABOUT US

PS Inspections provides on-site statutory inspections for your pressure equipment.

We can assist with:

  • Structural (AS1554) and Pressure Vessel (AS4037) Welding Inspection
  • Witnessing Welder Qualifications to AS3992
  • In-Service Inspections and Reports
  • Written Inspection Scopes
  • Assessment of Remaining Life
  • Classified Plant Registrations
  • Inspection Intervals and Scheduling
Home
FAQ's
I have repaired my pressure equipment, do I need a new design registration?
Refer section 6 of AS3788‐2006; every activity listed apart from minor repairs require assessment by a competent person to determine whether a new design registration is required.
What are the inspection requirements for new or altered pressure equipment?
All new or altered pressure equipment must undergo a commissioning inspection, refer Table 4.1 of AS3788-2006. Routine inspections should also be carried out at regular intervals not exceeding Table 4.1 of AS3788 .
Which new pressure vessel require design registration?
Pressure equipment, other than pressure piping, and categorised as hazard level A, B, C or D according to the criteria in section 2.1 of AS 4343: 2005 (Pressure equipment—hazard levels).
How is the Hazard level determined?
Hazard levels are determined using AS4343-2005. Refer table 1. For the determining of the fluid category (i.e. Harmful or Non-Harmful), please refer to NOHSC:1008(2004) or the MSDS.
CONTACT US
[forminator_form id="81"]

In-Service Inspections by qualified inspectors reassure you that your pressure equipment is operating as advertised. Inspectors help Owners identify problems before they become expensive unplanned outages, and identify opportunities to improve reliability and availability .

PS Inspections is your trusted third party to give you qualified, independent inspections for your pressure equipment.

Please call or use the contact form below to request a quote for your next inspection.

PS INSPECTIONS PTY LTD

PO Box 2147,
High Wycombe,
WA 6057, Australia.

Tel: (+61) 487 177 710